EON 510

S JB530

JBL

System Type: Self powered 10", two-way, bass-reflex design

Frequency Range (-10 dB): 58 Hz - 18.5 kHz (EQ in ‘Flat’ position)

Frequency Response (±3 dB): 70 Hz - 17 kHz (EQ in ‘Flat’ position)

Coverage Pattern: 100° H x 60° V nominal

Directivity Index (DI): 9 dB

Directivity Factor (Q): 8

Crossover Frequency: 1.8 kHz

System Power Rating: 280 W continuous, 560 W peak

LF Power amp: 220 W continuous at driver impedance

HF Power amp: 60 W continuous at driver impedance

Distortion: Less than 0.1% at rated power

Maximum SPL: 121 dB

Signal indicators: Limit: Red LED indicates input overload condition

Signal: Green LED indicates signal present

Mic/Line: Red LED indicator

Input Gain (input 3): Mic position: -Infinity to +40 dB

Line position: -Infinity to +4 dB (+20 dBu Max signal input)

Input Gain (input 1 & 2): -Infinity to +4 dB (+20 dBu Max signal input)

Input Impedance: 64 K Ohms (balanced), 32 K Ohms (unbalanced)

Boost EQ: LF +3 dB Shelving Filter @ 150 Hz

HF +2.5 dB Shelving Filter @ 4 kHz

Low Cut Filter: Preset high pass @ 120 Hz

LF Driver: 1 x JBL 261F 254 mm (10 in) Differential Drive® integrated woofer

with dual 1.5” voice coils.

HF Driver: 1 x JBL 2414H-1 25.4 mm (1 in) neodymium compression driver

Input 3 connector: Balanced XLR / . inch TRS combo jack with XLR loop through,

Output (Loop/Mix switch): Balanced male XLR, +20 dBu (peak) o/p level in MIX position

XLR Pin Assignments: Pin 2 (+), Pin 3 (-), Pin 1 (GND)

Limiting/Protection: Dynamic Limiter

Enclosure: PP impact copolymer, multi-purpose main & monitor orientation.

Handles: One on top with rubber grip

Suspension / Mounting: 36 mm pole socket with stabilizing screw, 3 x M10 suspension

points, 1 x M10 pull-back point

Grille: Powder coated perforated steel with acoustically transparent

black screen backing.

AC input: 120 – 240 V, 50/60 Hz

Dimensions (H x W x D): 490 mm x 313 mm x 262 mm (19.3 in x 12.3 in x 10.3 in)

Net Weight: 7.7 kg (17 lb)

STOC A